With the boom in the Cisco certification market, the 350-401 exam cost is rising, which is difficult for the public to afford. The 350-401 exam dumps at a high price at every turn are prohibitive. Don’t worry, have our 350-401 dumps to help you (moderate price)!
Pass4itSure 350-401 exam dumps recently updated (2023.2) https://www.pass4itsure.com/350-401.html moderately provides you with the latest and best exam questions at 45.99 pricing, without leaving your money bag empty.
High price 350-401 exam dumps study material, Is it really worth it?
Not worth it.
First, you need to know that expensive does not mean good.
In this case, unethical learning materials providers define the preparation of materials at a high price, often a hundred dollars, and your money is damaged. Know that the purpose of our study to pass the Cisco 350-401 exam is to increase our income and not let our money bag get empty.
In the same way, low-priced 350-401 exam dumps are not necessarily bad. To measure the quality of the dump, it should be determined whether the learning material is new or not and whether it is effective.
Pass4itSure 350-401 exam dumps provide you with the latest, best, and tested exam question and answer materials at an affordable price to ensure you pass the Cisco (ENCOR) exam.
Take a look at Pass4itSure 350-401 exam dumps
Pass4itSure, continually defines dumps at a modest price of $49.99, so that the majority of test takers are not financially stressed.
Pass4itSure’s latest 350-401 exam dumps provide you with 966 practice questions and answers to help you prepare for the exam with ease. And presented in PDF and software formats.
Latest Cisco ENCOR 350-401 Free Dumps Questions
Question 1:
Refer to the exhibit.
SwitchC connects HR and Sales to the Core switch However, business needs require that no traffic from the Finance VLAN traverse this switch Which command meets this requirement?
A. Option A
B. Option B
C. Option C
D. Option D
Correct Answer: D
Question 2:
Which configuration restricts the amount of SSH that a router accepts to 100 kbps?
A. class-map match-all CoPP_SSH match access-group name CoPP_SSH! Policy-map CoPP_SSH class CoPP_SSH police cir 100000 exceed-action drop ! !! Interface GigabitEthernet0/1 ip address 209.165.200.225 255.255.255.0 ip access-group CoPP_SSH out duplex auto speed auto media-type rj45 service-policy input CoPP_SSH! ip access-list extended CoPP_SSH permit tcp any eq 22!
B. class-map match-all CoPP_SSH match access-group name CoPP_SSH! Policy-map CoPP_SSH class CoPP_SSH police cir CoPP_SSH exceed-action drop! Interface GigabitEthernet0/1 ip address 209.165.200.225 255.255.255.0 ip access-group … out duplex auto speed auto media-type rj45 service-policy input CoPP_SSH! Ip access-list extended CoPP_SSH deny tcp any eq 22!
C. class-map match-all CoPP_SSH match access-group name CoPP_SSH! Policy-map CoPP_SSH class CoPP_SSH police cir 100000 exceed-action drop
!
Control-plane
service-policy input CoPP_SSH
!
Ip access-list extended CoPP_SSH
deny tcp any eq 22
!
D. class-map match-all CoPP_SSH match access-group name CoPP_SSH! Policy-map CoPP_SSH class CoPP_SSH police cir 100000 exceed-action drop! Control-plane transit service-policy input CoPP_SSH! Ip access-list extended CoPP_SSH permit tcp any eq 22!
Correct Answer: C
CoPP protects the route processor on network devices by treating route processor resources as a separate entity with its own ingress interface (and in some implementations, egress also). CoPP is used to police traffic that is destined for the route processor of the router such as:
+
routing protocols like OSPF, EIGRP, or BGP.
+
Gateway redundancy protocols like HSRP, VRRP, or GLBP. + Network management protocols like telnet, SSH, SNMP, or RADIUS.
Therefore we must apply the CoPP to deal with SSH because it is in the management plane. CoPP must be put under the “control-plane” command.
Question 3:
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller. Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Auto
B. Active
C. On
D. Passive
Correct Answer: C
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller\’s distribution system ports into a single 802.3ad port channel. Restriction for Link aggregation:
+ LAG requires the EtherChannel to be configured for ‘mode on’ on both the controller and the Catalyst switch. …
Reference: https://community.cisco.com/t5/wireless-mobility-documents/lag-link-aggregation/ta-p/3128669
Question 4:
Refer to the exhibit.
Which IP address becomes the next active next hop for 192.168.102 0/24 when 192.168.101.2 fails?
A. 192.168.101.18
B. 192.168.101.6
C. 192.168.101.10
D. 192.168.101.14
Correct Answer: A
The `>\’ shown in the output above indicates that the path with a next hop of 192.168.101.2 is the current best path.
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External > IGP Cost > eBGP Peering > Router ID
BGP prefers the path with the highest weight but the weights here are all 0 (which indicates all routes that are not originated by the local router) so we need to check the Local Preference. Answer \’192.168.101.18\’ path without LOCAL_PREF
(LocPrf column) means it has the default value of 100. Therefore we can find the two next best paths with the next hop of 192.168.101.18 and 192.168.101.10.
We have to move to the next path selection attribute: Originate. BGP prefers the path that the local router originated (which is indicated with the “next hop 0.0.0.0”). But none of the two best paths is self-originated.
The AS Path of the next hop 192.168.101.18 is shorter than the AS Path of the next hop 192.168.101.10 then the next hop 192.168.101.18 will be chosen as the next best path.
Question 5:
Which two steps are required for a complete Cisco DNA Center upgrade? (Choose two.)
A. golden image selection
B. automation backup
C. proxy configuration
D. application updates
E. system update
Correct Answer: DE
A complete Cisco DNA Center upgrade includes “System Update” and “Application Updates”
Reference:
Question 6:
In a Cisco SD-Access solution, what is the role of a fabric edge node?
A. to connect external Layer 3 networks to the SD-Access fabric
B. to connect wired endpoints to the SD-Access fabric
C. to advertise fabric IP address space to external networks
D. to connect the fusion router to the SD-Access fabric
Correct Answer: B
Question 7:
When is an external antenna used inside a building?
A. only when using Mobility Express
B. when it provides the required coverage
C. only when using 2 4 GHz
D. only when using 5 GHz
Correct Answer: B
Question 8:
What is the centralized control policy in a Cisco SD-WAN deployment?
A. list of ordered statements that define user access policies
B. a set of statements that defines how routing is performed
C. set of rules that governs nodes authentication within the cloud
D. a list of enabled services for all nodes within the cloud
Correct Answer: B
Question 9:
Which two network problems indicate a need to implement QoS in a campus network? (Choose two)
A. port flapping
B. excess jitter
C. misrouted network packets
D. duplicate IP addresses
E. bandwidth-related packet loss
Correct Answer: BE
Question 10:
What is the calculation that is used to measure the radiated power of a signal after it has gone through the radio, antenna cable, and antenna?
A. EIRP
B. mW
C. dBm
D. dBi
Correct Answer: A
Question 11:
Refer to the exhibit.
What are two reasons for IP SLA tracking failure? (Choose two )
A. The destination must be 172.30 30 2 for ICMP-echo
B. The threshold value is wrong
C. A route back to the R1 LAN network is missing in R2
D. The source interface is configured incorrectly.
E. The default route has the wrong next-hop IP address
Correct Answer: CD
Timeout (in milliseconds) sets the amount of time an IP SLAs operation waits for a response from its request packet. In other words, the timeout specifies how long the router should wait for a response to its ping before it is considered
failed. Threshold (in milliseconds too) sets the upper threshold value for calculating network monitoring statistics created by an IP SLAs operation. The threshold is used to activate a response to an IP SLA violation, e.g. send an SNMP trap or start a secondary SLA operation. In other words, the threshold value is only used to indicate over-threshold events, which do not affect reachability but may be used to evaluate the proper settings for the timeout command.
For reachability tracking, if the return code is OK or over the threshold, reachability is up; if not OK, reachability is down.
This tutorial can help you revise the IP SLA tracking topic:
http://www.firewall.cx/cisco-technical-knowledgebase/cisco-routers/813-cisco-router-ipslabasic.html
Note: Maybe some of us will wonder why there are these two commands:
R1(config)#ip route 0.0.0.0 0.0.0.0 172.20.20.2 track 10
R1(config)#no ip route 0.0.0.0 0.0.0.0 172.20.20.2
In fact the two commands:
ip route 0.0.0.0 0.0.0.0 172.20.20.2 track 10
ip route 0.0.0.0 0.0.0.0 172.20.20.2
are different. These two static routes can co-exist in the routing table. Therefore if the tracking goes down, the first command will be removed but the second one still exists and the backup path is not preferred. So we have to remove the second one.
Question 12:
DRAG DROP
Drag and drop the descriptions from the left onto the QoS components on the right.
Select and Place:
Correct Answer:
Question 13:
What is a consideration when designing a Cisco SD-Access underlay network?
A. End user subnets and endpoints are part of the underlay network.
B. The underlay switches provide endpoint physical connectivity for users.
C. Static routing is a requirement,
D. It must support IPv4 and IPv6 underlay networks.
Correct Answer: B
https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/cisco-sda-design-guide.html#Underlay
Question 14:
Refer to the exhibit. A network engineer must configure NETCONF. After creating the configuration, the engineer gets output from the command show line, but not from the show running-config. Which command completes the configuration?
A. Device(config)# netconf max-sessions 100
B. Device(config)# no netconf ssh acl 1
C. Device(config)# netconf lock-time 500
D. Device(config)# netconf max-message 1000
Correct Answer: D
A: The valid range is 4 to 16 (X
B: Disable net conf over sshv2 (X
C: The valid range is 1 to 300 (X
D: The valid range is 1 to 2147483. The default value is infinite
Command: netconf max-message <1-2147483> Kbytes. The engineer gets output from the command show line, but not from show running-config because the max-message is too small, it is not enough for the data of running-config.
Question 15:
Refer to the exhibit. Which commands are required to allow SSH connection to the router?
A. Router(config)#access-list 100 permit udp any any eq 22 Router(config)#access-list 101 permit top any any eq 22 Router(config)#class-map class-ssh ONU Router(config-cmap)#match access-group 101 Router(config)#policy-map COPP Router(config-pmap)#police 100000 conform-action transmit
B. Router(config)#access-list 100 permit top any eq 22 any Router(config)#class-map class-ssh Router(config-cmap)#match access-group 10 Router(config)#policy-map COPP Router(config-pmap)#class class-ssh Router(config-pmap-c)#police 100000 conform-action transmit
C. Router(config)#access-list 10 permit top any eq 22 any Router(config)#class-map class-ssh Router(config-cmap)#match access-group 10 Router(config)#policy-map COPP Router(config-pmap)#class class-ssh Router(config-pmap-c)#police 100000 conform-action transmit
D. Router(config)#access-list 100 permit tcp any any eq 22 Router(config)#access-list 101 permit tcp any any eq 22 Router(config)#class-map class-ssh Router(config-cmap)#match access-group 101 Router(config)#policy-map COPP Router(config-pmap)#class class-ssh Router(config-pmap-c)#police 100000 conform-action transmit
Correct Answer: D
the ACL itself is wrong, the eq keyword should be placed at the end because we want to match incoming ssh requests so the destination “ssh server” will use port 22, and the source “ssh client” will use a random port number.
Latest 350-401 dumps pdf: https://drive.google.com/file/d/1vd0-M9gbSw691vc5eBP_QxWBmCHD0xju/view?usp=share_link
Recently updated Cisco certification resources:
350-801 DUMPS (R 9.19) IDEAL 350-801 CLCOR STUDY GUIDE
300-415 DUMPS UPDATED | LATEST IMPLEMENTING CISCO SD-WAN SOLUTIONS (ENSDWI) STUDY MATERIAL
CISCO 352-001 PDF FREE SHARING OF PRACTICAL PROBLEMS
Summary:
Don’t pick the expensive ones, only pick the good ones. It’s a smart move for the Cisco 350-401 exam. Come here, Pass4itSure 350-401 exam dumps provide you with real-time updated 350-401 exam dumps at a moderate price https://www.pass4itsure.com/350-401.html study materials to help you complete the exam.
