Are you qualified enough to pass the Cisco 300-135 dumps? “Troubleshooting and Maintaining Cisco IP Networks” is the name of Cisco 300-135 exam dumps which covers all the knowledge points of the real Cisco exam. High quality Cisco 300-135 dumps Tshoot exam questions youtube study covers all key points. Pass4itsure Cisco 300-135 dumps exam questions answers are updated (118 Q&As) are verified by experts.
The associated certifications of 300-135 dumps is CCNP Routing and Switching. The Cisco https://www.pass4itsure.com/300-135.html dumps training resources are thoroughly reviewed to provide you the most updated form of products.
Exam Code: 300-135
Exam Name: Troubleshooting and Maintaining Cisco IP Networks
Q&As: 118
[100% Vaild Cisco 300-135 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWVjNzVmpXTDBzU00
[100% Vaild 1Z0-144 Dumps From Google Drive]: https://drive.google.com/open?id=0BwxjZr-ZDwwWYUpwdW8tcVhHazg
5% 1.0 Cisco 300-135 Dumps Network Principles
1.1 Use Cisco IOS troubleshooting tools
1.1.a Debug, conditional debug
1.1.b Ping and trace route with extended options
1.2 Apply troubleshooting methodologies
1.2.a Diagnose the root cause of networking issues (analyze symptoms, identify and describe root cause)
1.2.b Design and implement valid solutions
1.2.c Verify and monitor resolution
Pass4itsure Latest and Most Accurate Cisco 300-135 Dumps Exam Q&As:
1. On a ServerIron XL configured for firewall load balancing, the packet are load balanced using:
A. The firewall path
B. The session tables traded by the XLs
C. The MAC address set in the ServerIron
D. The hash value derived from the source and destination IP addresses
300-135 exam Answer: D
2. Firewalls can be assigned to which group?
A. 1
B. 2
C. 3
D. 4
E. 5
Answer: B
3. The firewall path describes the path
A. To the next firewall
B. For the health check
C. To the firewall partners
D. To the ServerIron on the other side of the firewall
300-135 dumps Answer: B
4. What is the maximum hop count allowed by RIP?
A. 15
B. 10
C. 255
D. no limit
Answer: A
5. What transport layer protocol provides a connection oriented service?
A. UDP
B. STP
C. TCP
D. ARP
300-135 pdf Answer: C
6. Which of the following ranges are defined as well-known port numbers?
A. 0-255
B. 1-256
C. 1-1023
D. 1-2048
Answer: C
7. What is the difference between TACACS+ and TACACS?
A. TACACS is an enhancement to TACACS+
B. TACACS is TCP based and TACACS+ is UDP based
C. TACACS+ provides encryption and uses TCP.
D. TACACS+ provides encryption and uses UDP.
300-135 vce Answer: C
8. The diagram shows an OSPF network with no designated router (DR) and no backup designated router
(BDR). Which of the following statements identifiy which routers will be selected DR and BDR?
A. Router C is DR, Router B is BDR
B. Router B is DR, Router A is BDR
C. Router B is BDR, Router A is DR
D. Router A is DR, Router C is BDR
Answer: B
9. Switch sw-FWS2 (see diagram) is running 802.1w (RSTP), with default settings. It has a crossover
cable between ports e38 and e48. Select the combination of port titles that match the ports.
A. e38: Root Port e48: Alternate Port
B. e38: Designated Port e48: Designated Port
C. e38: Alternate Port e48: Root Port
D. e38: Backup Port e48: Designated Port
E. e38: Designated Port e48: Backup Port.
300-135 exam Answer: E
10. In the diagram, ports e1 and e7 of sw-FWS1 have RSTP port titles assigned. Select the combination
of port titles that match the ports.
A. e1: Root Port e7: Alternate Port
B. e1: Designated Port e7: Designated Port
C. e1: Alternate Port e7: Root Port
D. e1: Backup Port e7: Designated Port
E. e1: Designated Port e7: Backup Port.
Answer: B
11. After Bridge elections have finished, in which 802.1d state will a Non-designated port remain?
A. Learning
B. Listening C.
Discarding D.
Blocking
300-135 dumps Answer: D
12. Which RMON group provides samplings of packet and error statistics captured at regular intervals?
A. events
B. alarms
C. statistics
D. history
Answer: D
13. Which of the following are true statements regarding a Topology Group? (Select all that applies)
A. It is used to add a tagged port to many VLANs with one configuration line.
B. It uses a common STP instance across member VLANs that is controlled by a master VLAN.
C. All of the VLANs that are part of the group in a switch configured with this feature must have matching
tagged ports.
D. It can be the single configuration point for defining L2 paths in networks using STP, RSTP, MRP or
VSRP protocols.
300-135 pdf Answer: BD
14. What routing algorithm is used by RIP?
A. distance vector
B. routing information
C. link state
D. dynamic routing
Answer: A
15. Of the following 802.1w (RSTP) port titles, which ones identify a port that is FORWARDING traffic?
(Select all that applies)
A. Root Port
B. Designated Port
C. Alternate Port
D. Backup Port E.
Edge Port
300-135 vce Answer: ABE
16. Select all of the following statements that apply to a VLAN Group. (Select all that applies)
A. It is used to add a tagged port to many VLANs with one configuration line.
B. It uses a common STP instance across member VLANs that is controlled by a master VLAN.
C. All of the VLANs that are part of the group in a switch configured with this feature must have matching
tagged ports.
D. It can be the single configuration point for defining L2 paths in networks using STP, RSTP, MRP or
VSRP protocols.
Answer: AC
17. What is the valid extended ACL ID range?
A. 100-200
B. 100-199
C. 0-99
D. 1-99
300-135 exam Answer: B
18. Which routing solution prevents loop problems by sending a maximum hop count when a link goes
down?
A. Split horizon
B. Poison reverse
C. STP D.
OSPF
Answer: B
19. Which 802.1d state will a switches Root Port and Designated Port enter after the 2 nd expiration of the
forwarding-delay timer.
A. Learning
B. Listening
C. Forwarding
D. Blocking
300-135 dumps Answer: C
20. What is the purpose of the STP listening state?
A. Listening to BPDUs to ensure there are no loops in the network.
B. Building a forwarding table.
C. Listening and learning Mac addresses.
D. Listening and building a filter table.
Answer: A
Pass4itsure are proud that we have already helped a vast number of people in passing the Cisco 300-135 dumps and becoming a Cisco Certified. We have maintained this reputation after years of experience. The https://www.pass4itsure.com/300-135.html dumps success rate in the past biennium has been impressive.
